Chongqing TOP Oil Purifier Co., Ltd. is one of the most reliable manufacturers and suppliers of oil decoloration machine in China, also supports customized service. Please feel free to buy advanced oil decoloration machine made in China here from our factory.
Products Description
Manufactured by Chongqing TOP Oil Purifier Co., Ltd., the TYR oil decoloration machine circulates darkened industrial and edible oils through a bed of activated natural bleaching clay at controlled flow rates. It strips out fine suspended solids, trace moisture and dissolved gases in a single pass, restoring the oil's original clarity without chemical additives or heating that could damage the base fluid.
Technical Specifications
|
Item |
Unit |
TYR-1 |
TYR-2 |
TYR-3 |
TYR-5 |
TYR-10 |
TYR-15 |
TYR-20 |
TYR-30 |
TYR-50 |
|
|
Flow Rate |
T/d |
1 |
2 |
3 |
5 |
10 |
15 |
20 |
30 |
50 |
|
|
Power Supply |
380V/50HZ/3P 5 Wires (Can be customized) |
||||||||||
|
Working Noise |
dB(A) |
≤ 65 |
|||||||||
|
MTBF |
H |
≥ 4000 |
|||||||||
|
Continuous Working |
H |
≥150 |
|||||||||
|
Oil Outlet/Inlet Caliber |
mm |
Φ25 |
Φ25 |
Φ25 |
Φ32 |
Φ42 |
Φ42 |
Φ50 |
Φ50 |
Φ60 |
|
|
Weight |
KG |
1500 |
2000 |
2500 |
3000 |
3500 |
4000 |
4500 |
5000 |
5500 |
|
|
Size |
L |
mm |
1800 |
1850 |
1900 |
1950 |
2000 |
2200 |
2300 |
2400 |
2500 |
|
W |
mm |
1300 |
1350 |
1400 |
1450 |
1500 |
1600 |
1600 |
1700 |
1800 |
|
|
H |
mm |
2300 |
2300 |
2300 |
2400 |
2500 |
2700 |
2700 |
2700 |
2700 |
|
|
Index After Filtering |
Moisture Content |
PPM |
≤ 100 |
||||||||
|
Gas Content |
% |
≤ 0.1 |
|||||||||
|
Impurity Size |
μm |
≤5 (Can be customized) |
|||||||||
|
Cleanliness |
Degree |
≤ 6(NAS 1638) |
|||||||||
|
Color |
L |
≤ 1~3 |
|||||||||
How It Performs
- Used oil from steam turbine lube circuits or hydraulic power packs often turns dark from oxidation and entrained metal fines long before its lubricating film breaks down. Once the oil goes through the TYR oil decoloration machine, the bleaching clay adsorbs those polymerised colour bodies and acidic residues, lifting the ASTM colour from 8–9 to 1–3. The result looks like fresh oil, and it can go straight back into service without blending.
- A touchscreen monitors pressure, temperature and vacuum in real time. If a filter clogs or the vacuum drifts, the machine flags the problem and shuts down on its own – a feature that makes unattended overnight runs practical in a busy maintenance shop.
- Routine upkeep stays simple for this oil decoloration machine: the clay bed and pre‑filter are swapped every 200 to 300 running hours. A quick‑release lid opens without tools, so a single technician can change the charge and be back on line in under an hour.
Where It Fits
- Steel mills and power plants keep one TYR unit on standby to polish hydraulic, gear and turbine oils during planned outages, reducing the volume of oil sent for disposal.
- Waste oil recyclers connect the machine directly to their distillation columns. The distillate still carries a dark tint that knocks down its resale price; the bleaching clay pulls those stubborn chromophores out, yielding a water-white base oil or diesel cut.
- Biodiesel producers use it to pre-clean waste cooking oil. Removing suspended meal fines and oxidised fatty acid gums before the reactor stabilises transesterification, raises methyl ester yield and prevents the emulsions that can shut down a batch.
FAQ
Q: How do we know when to replace the bleaching clay?
A: Most plants run a weekly ASTM D1500 colour check on the treated oil. When the colour number starts creeping back up, the bed is spent. Heavily contaminated feeds burn through the clay faster, so operators keep a spare charge ready and swap it once decolorization efficiency drops.
Q: Can we switch between industrial oils and edible oils on the same machine?
A: Yes, provided you flush the oil circuit thoroughly between campaigns. The clay itself is a natural mineral product and works on both types of oil, but cross-contamination can affect the taste or odour of food-grade oils, so a cleaning protocol is essential.
Q: We already have a vacuum distillation plant. Why add a decoloration step?
A: Distillation removes light ends and some heavy residues but doesn't touch the colour forming aromatic polymers that give the oil a dark hue. Piping the distillate through the TYR machine as a final polishing step turns a hard to sell dark cut into a product that meets the visual spec buyers expect.