Chongqing TOP Oil Purifier Co., Ltd. is one of the most reliable manufacturers and suppliers of turbine oil regeneration unit in China, also supports customized service. Please feel free to buy advanced turbine oil regeneration unit made in China here from our factory.
Products Description
The Turbine Oil Regeneration Unit integrates a coalescer and separator filter with vacuum dehydration and multi-stage filtration to remove water, gas and fine particulates from heavily emulsified and degraded turbine lubricants.
Technical Parameters
|
Item |
Unit |
TY-M-10 |
TY-M-20 |
TY-M-30 |
TY-M-50 |
TY-M -100 |
TY-M -150 |
TY-M -200 |
TY-M -250 |
TY-M -300 |
|
|
Flow Rate |
L/min |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
|
|
Flow Rate |
L/H |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
|
|
Working Vacuum |
Mpa |
-0.06 ~- 0.098 |
|||||||||
|
Working Pressure |
Mpa |
≤0.3 |
|||||||||
|
Temperature Range |
℃ |
0~100 |
|||||||||
|
Working Oil Temperature |
℃ |
45~65 |
|||||||||
|
Power Supply |
380V/50HZ/3Ph 5 wire (Customizable) |
||||||||||
|
Continuous Working Time |
H |
≥150 |
|||||||||
|
Working Noise |
dB(A) |
≤65 |
≤68 |
≤68 |
≤70 |
≤70 |
≤75 |
≤75 |
≤78 |
≤80 |
|
|
Electric Heating Power |
kW |
15 |
18 |
24 |
36 |
60 |
72 |
120 |
150 |
180 |
|
|
Total Electric Power |
kW |
17 |
20 |
26 |
39 |
65 |
79 |
128 |
180 |
192 |
|
|
Inlet/Outlet |
mm |
Ф25 |
Ф25 |
Ф25 |
Ф32 |
Ф42 |
Ф45 |
Ф50 |
Ф60 |
Ф63 |
|
|
Weight |
kg |
350 |
400 |
450 |
500 |
900 |
1300 |
1500 |
1800 |
2000 |
|
|
Size |
L |
mm |
1350 |
1400 |
1450 |
1500 |
1700 |
1800 |
2000 |
2100 |
2400 |
|
W |
mm |
950 |
1000 |
1050 |
1100 |
1150 |
1250 |
1400 |
1450 |
1550 |
|
|
H |
mm |
1650 |
1700 |
1750 |
1800 |
1800 |
2000 |
2200 |
2300 |
2400 |
|
|
Index After Filtration |
Moisture Content |
PPM |
≤50 |
||||||||
|
Gas Content |
% |
0.1 |
|||||||||
|
Impurity Size |
μm |
≤1 (Customizable) |
|||||||||
Feature
- Oil-water emulsions caused by gland steam leaks and condensation are a persistent headache in turbine lube systems. The coalescer and separator filter agglomerates fine water droplets and strips free water, returning the oil to a clear, bright condition and stopping moisture-related scoring of bearings and valve spools.
- Under -0.06 to -0.098 MPa vacuum, the unit pulls dissolved moisture below 50 ppm while drawing out entrained gases, which slows oil oxidation and helps prevent vapour lock in the lubrication circuit.
- Metal debris, sludge and colloidal fines are intercepted by staged pre-filters and fine filters down to 1 µm absolute, keeping the oil within the cleanliness limits turbine manufacturers specify and cutting abrasive wear on close-tolerance parts.
- The heater, vacuum vessel and entire filter train sit on one compact frame, reducing the footprint and on-site piping compared to separate skids, and the whole unit can be lifted into place as a single package.
Application Scenarios
- Steam turbine power plants dealing with continuous oil emulsification from gland seal leaks and condensation.
- Gas turbine and combined-cycle facilities where sustained high operating temperatures accelerate acid formation and oil degradation.
- Hydropower stations and steel mills experiencing constant water ingress and particulate contamination that shorten turbine oil service life.